富威装饰材料

Your present location:News >> News Center >> Company News >> Main processing technology and technical parameters of linear edge banding machine

Font Size:big  middle  small

Main processing technology and technical parameters of linear edge banding machine

Number of visits: Date:2017-6-22

The requirements of milling parts after the surrounding smooth thickness, adjacent to ensure good verticality, edge bonding quality, and keep the edge temperature stable coating process, sealing machine should avoid air distribution, try to maintain a stable equilibrium temperature and humidity of the environment.

 

Plastic material such as wood, paper and other materials available when melamine PVC, solvent based adhesive or PVA glue; using ALKOR - CELL or thin wood by hot melt adhesive glue or PVA.

 

After starting up, the edge sealing machine thermostat can be set at 130~150 degrees centigrade. After 20 minutes, the temperature will be adjusted to 150~200 degrees centigrade. When the glue is fully melted, the machine can be switched on. When the temperature reaches the set point, the indicator light shows that the clutch can be closed. When the processing is interrupted, the thermostat is transferred back to about 150 DEG C, depending on the specific circumstances. The temperature of the internal heat of the slide plate of the feed inlet of the machine is generally controlled at 100~135 centigrade.

 

Now the edge coating machine glue amount can be manually adjusted, can also be automatically adjusted. Generally, the amount of edge coating is 200~300g/m2.

 

When the edge banding machine is operated, the technical parameters of each part are assigned with several operations, and the operation is accurate. Such as the position of the roll slider, the control of the working pressure of the first roller and the second roller, and the correct operation method for keeping the work under any conditions. To monitor closely the edge of the situation, the timely adjustment of equipment due to processing for a period of time after the data generated by the deviation.

 

At any time to clean up the edge of the machine in the processing of residual wood debris, to ensure that the machine and tools are always in a good state.

TypeInfo: Company News

Keywords for the information: